基于Poisson模型的湍流退化图像多帧迭代复原算法

随着航天空间技术的发展，空中目标的成像探测研究越来越重要。受大气湍流的干扰，观测到的目标图像是严重模糊的。为了从观察到的多帧含噪的湍流退化图像中将目标原图像有效地恢复出来，本文提出了一种新颖的基于图像统计模型的图像复原算法。跟据图像Poisson概率模型建立了有关多帧图像数据的对数似然函数，通过极大化该对数似然函数，推导出了目标图像及各帧图像点扩展函数的迭代求解关系。同时。将点扩展函数的支持域等先验条件有效地加入到迭代计算过程中，以便快速地利用迭代技术将目标图像和各帧点扩展函数估计出来。该算法能用少数帧图像极大程度地恢复出目标图像。为了验证本文算法的恢复效果和可靠性，对在强噪声污染条件下的湍流退化图像进行了恢复实验，实验结果表明本文算法对空中目标湍流退化图像的复原是非常有效的。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

利用有限元方法逼近飞行器轨道主动段扰动引力

为了克服引力位系数模型计算飞行器轨道主动段扰动引力所存在的计算量大，并且难以进行实时计算的缺点，提出利用有限元内插的方法对主动段扰动引力进行逼近。根据有限元分析中区域剖分插值的原理，采用了对飞行器轨道周围有限范围的空间区域进行有限元剖分的方式，计算出各剖分单元每个顶点处的扰动引力，然后利用剖分单元各顶点的扰动引力分量内插出飞行器轨道点对应的扰动引力分量值。计算过程和结果表明，这种方法能够快速、精确可靠地逼近飞行器轨道主动段扰动引力，满足了有关文献中所提出的要求。     

大力神ⅣB运载火箭和推进系统

大力神ⅣB运载火箭在过去的12次飞行中表现出了优良的性能.其中,它的大型轻质固体发动机采用改性推进剂、三段石墨复合材料壳体和柔性喷管,是经飞行考验最大的固体火箭发动机之一.芯级火箭一、二级发动机推进剂为四氧化二氮/混肼50、半人马座上面级发动机为液氢/液氧,可把超过5760kg的有效载荷直接送入地球同步轨道.广泛运用于各种型号运载火箭的高能量半人马座上面级发动机,在飞行过程中能三次起动,第一次点火到达停泊轨道,在停泊轨道第二次点火将自身和卫星送入大椭圆轨道,经5到7小时滑行后再次点火到达地球同步轨道的高度,在大力神Ⅳ/半人马座运载火箭上它的工作时间创造了最长的记录.     

多体卫星复合控制物理仿真试验系统

对于具有星间链路天线的多体卫星而言 ,进行星体姿态和天线指向复合控制的地面物理仿真试验研究是一个重要课题。本文主要叙述利用单轴气浮台模拟卫星姿态运动 ,由天线框架驱动机构 (GDA)实物连接组成的多体卫星平面运动动力学环境下的物理仿真试验系统。     

Ground and on-orbit command and data handling architectures for the Active Rack Isolation System microgravity flight experiment

The Active Rack Isolation System [ARIS] International Space Station [ISS] Characterization Experiment, or ARIS-ICE for short, is a long duration microgravity characterization experiment aboard the ISS. The objective of the experiment is to fully characterize active microgravity performance of the first ARIS rack deployed on the ISS. Efficient ground and on-orbit command and data handling [C&DH] segments are the crux in achieving the challenging objectives of the mission. The objective of the paper is to provide an overview of the C&DH architectures developed for ARIS-ICE, with the view that these architectures may serve as a model for future ISS microgravity payloads. Both ground and on-orbit segments, and their interaction with corresponding ISS C&DH systems are presented. The heart of the on-orbit segment is the ARIS-ICE Payload On-orbit Processor, ARIS-ICE POP for short. The POP manages communication with the ISS C&DH system and other ISS subsystems and payloads, enables automation of test/data collection sequences, and provides a wide range of utilities such as efficient file downlinks/uplinks, data post-processing, data compression and data storage. The hardware and software architecture of the POP is presented and it is shown that the built-in functionality helps to dramatically streamline the efficiency of on-orbit operations. The ground segment has at its heart special ARIS-ICE Ground Support Equipment [GSE] software developed for the experiment. The software enables efficient command and file uplinks, and reconstruction and display of science telemetry packets. The GSE software architecture is discussed along with its interactions with ISS ground C&DH elements. A test sequence example is used to demonstrate the interplay between the ground and on-orbit segments.     

Research priorities and plans for the International Space Station-results of the 'REMAP' Task Force

Recent events in the International Space Station (ISS) Program have resulted in the necessity to re-examine the research priorities and research plans for future years. Due to both technical and fiscal resource constraints expected on the International Space Station, it is imperative that research priorities be carefully reviewed and clearly articulated. In consultation with OSTP and the Office of Management and budget (OMB), NASA's Office of Biological and Physical Research (OBPR) assembled an ad-hoc external advisory committee, the Biological and Physical Research Maximization and Prioritization (REMAP) Task Force. This paper describes the outcome of the Task Force and how it is being used to define a roadmap for near and long-term Biological and Physical Research objectives that supports NASA's Vision and Mission. Additionally, the paper discusses further prioritizations that were necessitated by budget and ISS resource constraints in order to maximize utilization of the International Space Station. Finally, a process has been developed to integrate the requirements for this prioritized research with other agency requirements to develop an integrated ISS assembly and utilization plan that maximizes scientific output.     

一种适于动态环境的盲多用户检测算法

比较两种盲多用户检测算法在动态环境中的收敛性能,并通过计算机进行模拟仿真。其中一种是能随输入信号矢量变化而变化的变步长最小输出能量盲算法;另一种是既保持最小输出能量检测器的全局收敛性,又具有最小均方误差检测器高输出信干比优点的判决反馈变步长盲算法。利用前者在动态强干扰下收敛快及后者在稳态时输出信干比高的优势,将二者结合起来应用到动态环境中,提高系统性能,同时抑制多址干扰和窄带干扰。     

基于TDRSS的低轨卫星定轨方法研究

利用跟踪与数据中继卫星系统（TDRSS）组成天基测控系统对低轨卫星进行轨道确定，并讨论了低轨卫星在TDRSS系统覆盖区域的时间段，以改进的Gauss-Newton算法为基础，设计了非线性迭代的微分轨道改进算法，有效抑制了算法截断误差。仿真实验证明基于TDRSS的测控技术可显著提高测控覆盖率，减少地面测控站压力，有效确定低轨卫星轨道，定轨位置误差小于20m，速度误差小于0．01m／s，能满足一般低轨卫星的定轨精度要求。     

我国月面巡视探测器定位方法研究

月球自动巡视勘查技术中的月面巡视探测器的导航控制,需要研究月面巡视探测器的定位技术。文章通过对国外漫游车定位方法的研究,提出了我国月面巡视探测器在全局坐标系和局部坐标系中进行定位的方法。月面巡视探测器在全局坐标系中的定位可以采用星敏感器以及陆标辨识的方式;局部坐标系的定位可以采用惯性导航系统 里程计以及着陆器帮助下定位和视觉里程计的定位方法。这几种定位方式的组合应用,能够满足月面巡视探测器导航方面的定位要求。